Ultrafuse ABS Green 1.75mm

Roll over image for larger view

Spacer imageSpacer image

Ultrafuse ABS Green 1.75mm

Product code: BF-ABS-0107a075

Part Number:  ABS-0107a075



£27.00 incl. VAT.


In stock



Innofil3D is now known as Ultrafuse, part of BASF’s new brand, Forward AM.


ABS Green 1.75mm filament is a high quality 3D printing material. ABS is a strong plastic and very durable, the same material as used in drain pipes and hard suitcases, with a higher glass transition temperature than PLA. This makes it an ideal 3D printing filament for parts requiring detail and additional strength for post processing or testing.


Each Ultrafuse ABS spool contains approx. 750g of filament.


Due to ABS’ inherent properties and structure, it can make it more prone to warping or cracking, particularly when printing large parts, so we recommend it for smaller more detailed prints.


Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Innofil3D ABS Technical Specifications



Innofil3D ABS

(Acrylonitrile Butadiene Styrene)




Recommended print temperature

235°C ± 10°C

Recommended print speed

40 - 80mm/sec

Spool hub hole


Spool diameter


Glass transition temperature

Approx. 105°C


1050 kg/m3


Compatible with wide range of FDM / FFF 3D printers which accept 2.85mm or 1.75mm ABS filament

Storage conditions

For best results, store in air-tight container

Approved food contact safe



NB: Properties and settings may vary depending on printer type and setting.


Download Innofil3D ABS technical data sheet PDF

Download Innofil3D ABS material safety data sheet PDF

Does Innofil3D ABS work with all 3D printers?

Innofil3D ABS filament comes on an open spool (see Tech Specs for spool dimensions) in 2.85mm diameter. It is suitable for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.


What are the processing guidelines for Innofil3D ABS?

  • Recommended extruder temperature: 235°C ± 10°C

  • Recommended print speed: 40 - 80mm/s 


What is the diameter tolerance?

The diameter tolerance on Innofil3D ABS filament is 2.85mm ± 0.10mm and 1.75 ± 0.05 mm.


Is a heated bed necessary for printing with Innofil3D ABS?

ABS is a trickier material to print with due to its inherent properties it is prone to warping and cracking. We have found that maintaining the temperature whilst printing in ABS helps to improve the finished print quality, a heated bed in this case would assist with this temperature regulation.


Can Innofil3D ABS be used as support material?

Yes, ABS works well in prints with support material and can be removed once the print is complete.


Other Customers Purchased
Ultrafuse ABS Black 1.75mm

Ultrafuse ABS Black 1.75mm

£22.50 excl. VAT
Ultrafuse ABS Blue 1.75mm

Ultrafuse ABS Blue 1.75mm

£22.50 excl. VAT
Ultrafuse ABS Natural White 1.75mm

Ultrafuse ABS Natural White 1.75mm

£22.50 excl. VAT
Ultrafuse ABS Red 1.75mm

Ultrafuse ABS Red 1.75mm

£22.50 excl. VAT
Ultrafuse ABS Silver 1.75mm

Ultrafuse ABS Silver 1.75mm

£22.50 excl. VAT