colorFabb corkFill 1.75mm

colorFabb corkFill 1.75mm
 colorFabb corkFill 1.75mmcolorFabb corkFill 1.75mm 

Our Price:  £30.00

(£36.00 Inc. VAT)

Availability:  

In stock
Product code:  CF-175-CRK
+

ColorFabb


corkFill 1.75mm filament by colorFabb is a high quality speciality 3D printing material. It is colorFabb PLA/PHA blended with cork fibres, creating a textured finish to your 3D printed parts. corkFill is dark brown in colour.

Each colorFabb corkFill spool contains approx. 650g of filament.


corkfill info

Does colorFabb corkFill work with all 3D printers?

The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials. colorFabb corkFill can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.

corkFill is likely to require some adjustment to your 3D printer settings to achieve the best results. For example, it is recommended to increase the flow rate with approximately 4-10%. This will allow the filament to keep passing through the hot zone at a steady pace.

What are the processing guidelines for colorFabb corkFill filament?

  • Recommended extruder temperature: 210 - 230°C
  • Recommended platform temperature: 50 - 60°C (if available, heated bed not required)
  • Recommended print speed: 40 - 60 mm/s

Is a heated bed necessary for printing with colorFabb corkFill?

No, a heated bed is not necessary for printing in corkFill. Should you wish to use a heated bed, the recommended platform temperature is 50-60°C.

colorFabb corkFill Technical Specifications

Name

colorFabb corkFill

PLA/PHA with cork fibres

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

210°C - 230°C

Recommended bed temperature 50°C - 60°C (if available. Heated bed not required)
Recommended print speed 40 - 60 mm/s
Spool hub hole

55mm      

Spool diameter 200mm
Compatibility 

Compatible with wide range of FFF / FDM based 3D printers which accept 1.75mm or 2.85mm filament 

Storage conditions

For best results, store in air-tight container

Approved food contact safe No

NB Properties and settings may vary depending on printer type and settings.

Download colorFabb corkFill Safety Data Sheet PDF