colorFabb copperFill 1.75mm 1500g

Our Price: £60.00

(£72.00 Inc. VAT)

Availability:

In stock

Product code: CF-175-CPR-1500

–+

ColorFabb

copperFill 1.75mm 1500g filament by colorFabb is an experimental* speciality 3D printing material. Based on colorFabb’s excellent PLA filament, copperFill has the addition of micronised copper powder blended within the material. 3D printing in copperFill creates a wonderful finish to your parts, which can then be sanded and polished to shimmer and shine.

*Experimental material: testing showed reliable results using the "all metal" hot-ends. Hot-ends with a teflon isolator coupler can generate adhesion to the copper filament potentially leading to clogs.

Each colorFabb copperFill spool contains approx. 1500g of filament, is available in 1.75mm and 2.85mm diameters.

FEATURES
TECH SPECS

copperfill info

Does colorFabb copperFill work with all 3D printers?

The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

Hot-ends with a teflon isolator coupler can generate adhesion to the copper filament potentially leading to clogs.

What are the processing guidelines for colorFabb copperFill filament?

Recommended extruder temperature: 190 - 210C°C
Recommended platform temperature: 50 - 60°C (if available, heated bed not required)
Recommended print speed: 40 - 100 mm/s

Are there any tips for printing in colorFabb copperFill?

Yes. Have a read of colorFabb’s blog on printing in copperFill.

Is a heated bed necessary for printing with colorFabb copperFill?

No, a heated bed is not necessary for printing in bronzeFill. Should you wish to use a heated bed, the recommended platform temperature is 50 - 60°C.

colorFabb copperFill Technical Specifications

Name	colorFabb copperFill (PLA/PHA + fine copper particles)
Diameter(s)	1.75mm 2.85mm
Recommended print temperature	190°C - 210°C
Recommended bed temperature	50°C - 60°C (if available. Heated bed not required)
Recommended print speed	40 - 100 mm/s
Spool hub hole	55mm
Spool diameter	200mm
Glass transition temperature	55°C
Density	3.9 g/cm3
Compatibility	Experimental material. Testing showed reliable results using the "all metal" hot-ends. Hot-ends with a teflon isolator coupler can generate adhesion to the copper filament potentially leading to clogs.
Storage conditions	For best results, store in air-tight container
Approved food contact safe	No

NB Properties and settings may vary depending on printer type and settings.

Download colorFabb copperFill Safety Data Sheet PDF

Other Customers Bought

colorFabb steelFill 1.75mm

£37.50