UltiMaker Method X Carbon Edition

UltiMaker Method X Carbon Edition

Our Price:  £5,885.00

(£7,062.00 Inc. VAT)


In stock
Product code:  MB-900-0074A


The UltiMaker Method X Carbon Edition is a desktop 3D printer, built on Stratasys technologies, designed to print in Nylon with chopped Carbon Fibre material. The printer has a circulating 110°C heated chamber for 3D printing in a range of materials including Nylon Carbon Fibre, ABS, Tough PLA and other engineering materials, with Stratasys SR-30 support material on its dual extruders.

The Method X Carbon Edition features

  • Circulating Heated Chamber - heat controlled to improve layer adhesion with better dimensional accuracy, and reduces the risk of warping
  • Print in range of materials - the Carbon Edition is designed to print in Nylon with chopped carbon fibre, but also prints in ABS, Tough PLA, PLA and ASA
  • Dissolving Supports - the Method X enables support structures to be printed in Stratasys SR-30 or PVA soluble supports (material combination dependent)
  • Dry-Sealed Material Bays - optimal storage environment for materials, forming a protective seal from damaging humidity, with sensors built-in to the bays to monitor conditions
  • Smart Sensors & Connectivity - a network of 21 intelligent sensors embedded throughout the printer gives full control, whilst making material and print management as seamless as possible. MakerBot materials for the Method come fitted with RFID tags

UltiMaker Method X Carbon Edition comes with MakerBot Print software.

As a Professional level MakerBot Authorised Partner, we are certified to provide our customers with the highest level of technical support and preferential access to new product upgrades.

12 month manufacturer warranty included.

The UltiMaker Method X Carbon Edition 3D Printer comes with:

  • 1x Spring Steel Build Plate
  • 1x Model 1C Extruder
  • 1x Support 2XA Extruder
  • 1x Support 2 Extruder
  • 1x Accessory Tool Kit (Wire brush, Hex key, Trimmers, Spatula)
  • 1x UK power cable
  • MakerBot Print software download

UltiMaker Method X Carbon Edition Technical Specifications

Print Technology
Extrusion / Fused Filament Fabrication (FFF)
MakerBot Model 1C Extruder
MakerBot Support 2XA Extruder or MakerBot Support 2 Extruder
Supported Material(s)
MakerBot Precision Materials | ABS, PLA, Tough PLA, PETG, Nylon, Nylon Carbon Fibre
MakerBot Support Materials | PVA, Stratasys® SR-30
Product Dimensions
413mm (w) x 437mm (l) x 649mm (h)
16.3'' (w) x 17.2'' (l) x 25.6" (h)
Max build volume
Single extrusion: 190mm (w) x 190mm (l) x 196mm (h) / 7.5'' (w) x 7.5'' (l) x 7.5'' (h)
Dual extrusion: 190mm (w) x 152mm (l) x 196mm (h) / 7.5'' (w) x 6.0'' (l) x 7.5'' (h)
Layer resolution
20 - 400 microns
Dimensional accuracy
± 0.2mm / ± 0.007"
Build surface
Spring Steel Build Plate with Grip Surface
Print chamber
Circulating Heated Chamber
Chamber temperature 110ºC
Power requirements
100 - 240V, 8.1A - 3.4A, 50-60Hz, 800W max
Support structures
Soluble support structures
Material storage
Dry Sealed Material Bays plus sensor for humidity & temperature
Free print software
Yes: MakerBot Print
Software compatibility
Windows (7, 10)
Mac OS X (10.12+)
Ethernet, Wi-Fi, USB stick
Ambient operating temperature
15 - 26ºC, 10 - 90% RH non condensing

Please note the Technical Specifications are provided by the Manufacturer and may be subject to change.

Other Customers Bought
MakerBot Method 2XA Extruder


MakerBot Nylon Carbon Fibre


Stratasys SR30 Soluble Support