Ultimaker Breakaway Support Material

Ultimaker Breakaway Support Material
Ultimaker Breakaway Support MaterialUltimaker Breakaway Support MaterialUltimaker Breakaway Support MaterialUltimaker Breakaway Support MaterialUltimaker Breakaway Support Material

Our Price:  £53.50

(£64.20 Inc. VAT)

Availability:  

In stock
Product code:  UM-200551
+

Ultimaker


Ultimaker Breakaway is a support material for multi-extrusion 3D printing. It is designed to be quick to remove by breaking away from the printed part, leaving a smooth finish and provides good adhesion to ABS, PLA, Nylon, CPE, or CPE+. It is a good alternative to PVA / water soluble based support materials as Ultimaker Breakaway has a long shelf life and is less moisture sensitive.

Ultimaker Breakaway is ideal for parts with flat or angled surfaces or for water sensitive materials, as the support removal process is dry.

This easy to remove support material should be printed with a 0.4mm AA Ultimaker print core on the Ultimaker 3 (Extended) and S5.

Ultimaker Breakaway support material is white in colour, has a 2.85mm diameter and comes on 750g spool. See compatible Ultimaker 3D printers and materials below.


Ultimaker recommended material v 3D printer compatibility matrix. 

Not all materials are compatible with the full range of Ultimaker 3D printers. In the below table are Ultimaker's recommended pairings and whether a material is officially supported, experimental or not recommended.

CREAT3D's Advice: contact us to discuss your material and print requirements in advance. Some materials require advanced settings by experienced users.

 
Ultimaker 3D Printer and Filament Compatibility
Ultimaker Filament
Ultimaker S5 and S3
Ultimaker 3 incl. Extended
Ultimaker 2+ incl. Extended
Ultimaker 2 incl. Extended
Ultimaker 2 Go
Ultimaker Original+
Ultimaker Original
PLA
ABS
X
E2
CPE
X
E2
CPE+
E
X
E
E2
Nylon
E
X
E
E2
PC
E
X
E
E2
TPU 95A
X
X
X
X
PP
X
X
X
X
PVA
E
X
X
X
X
Breakaway
X
X
X
X
X
Tough PLA
E
E
E
E
E

Notes: 

✔ Ultimaker officially supported            E Experimental           X Not supported

1 Ultimaker officially supports these combinations using 0.4mm print cores

2 Ultimaker recommend these combinations when using the heated bed upgrade installed on the printer

Please note these Ultimaker recommendations are based on using Ultimaker supported materials. 


Ultimaker recommended dual  material extrusion compatibility

Below are Ultimaker's recommended combination of dual material compatibility for printing on the Ultimaker 3 range of 3D printers.

 
Ultimaker 3, S3 and S5 Dual Extrusion Material Compatibility
 
 
PLA
Tough PLA
ABS
Nylon
CPE
CPE+
PC
TPU 95A
PP
PVA
Breakaway
PLA
E
X
X
X
X
X
X
X
Tough PLA
 
X
X
X
X
X
X
X
ABS
 
 
X
X
X
X
E
X
E
Nylon
 
 
 
E
X
X
X
E
X
CPE
 
 
 
 
X
X
X
X
CPE+
 
 
 
 
 
E
X
X
X
E
PC
 
 
 
 
 
 
E
E
X
X
E
TPU 95A
 
 
 
 
 
 
 
E
X
E
E
PP
 
 
 
 
 
 
 
 
E
X
X
PVA
 
 
 
 
 
 
 
 
 
X
X
Breakaway
 
 
 
 
 
 
 
 
 
 
X

Notes: 

✔ Ultimaker officially supported            E Experimental           X Not supported

Please note these Ultimaker recommendations are based on using Ultimaker supported materials. 


ULTIMAKER RECOMMENDED DUAL  MATERIAL EXTRUSION COMPATIBILITY

Ultimaker Print Core & Material Compatibility Matrix

Ultimaker Breakaway Technical Specifications

Type

Ultimaker Breakaway support material

(Thermoplastic polyurethane Polylactic acid - CAS 9051-89-2)

Diameter(s)

2.85mm

Recommended print temperature

215°C - 230°C

Recommended bed temperature

60°C if printed as a single material

Where printed with a build material, use the build material required print bed settings

Recommended cooling fan speed

100% 

Comments

Ultimaker Breakaway should be used with a 0.4mm print core. See Ultimaker 3D print suggestions for Breakaway

NB: Properties and settings may vary depending on printer type and setting.

Download Ultimaker Breakaway technical data sheet PDF

Download Ultimaker Breakaway safety data sheet PDF

Other Customers Bought
Ultimaker PVA Filament Natural

£39.50  -  £83.50