colorFabb PA-CF Low Warp 2.85mm

Roll over image for larger view

 colorFabb PA-CF Low Warp 2.85mmcolorFabb PA-CF Low Warp 2.85mm 
Spacer imageSpacer image

colorFabb PA-CF Low Warp 2.85mm

Product code: CF-285-PA-CF



£72.00 incl. VAT.


In stock



colorFabb PA-CF Low Warp 2.85mm 3D printing material has been developed between colorFabb and LEHVOSS Group. PA-CF Low Warp is a carbon-fibre infused polyamide material for use with FFF (extrusion) 3D printers.


PA-CF Low Warp demonstrates good tensile and impact strength over standard FFF filaments, and allows continued use at 120°C while retaining sufficient properties for the intended application.


PA-CF Low Warp 2.85mm is abrasive. colorFabb recommend using wear resistant nozzles such as hardened steel.


Each colorFabb PA-CF spool contains approx. 700g of filament, is available in 2.85mm and 1.75mm diameters.


Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

colorFabb PA-CF Low Warp Technical Specifications



colorFabb PA-CF Low Warp




Recommended print temperature

260°C - 280°C

Recommended bed temperature Cold or 40°C - 50°C (for higher infill prints)
Spool hub hole


Spool diameter 200mm
Density 1.4 g/cm3
Comments / considerations

Carbon Fibre is abrasive and will accelerate the nozzle wear of brass nozzles much faster than unfilled filaments. colorFabb recommend using wear resistant nozzles, such as E3D hardened steel nozzles

Due to high stiffness of 2.85mm filament, colorFabb recommend users to use spoolmounts which have some friction between the spool and holder, to prevent unspooling of filament. For more printing tips with colorFabb PA-CF visit

Storage conditions

Store in air-tight container, material is moisture sensitive


NB Properties and settings may vary depending on printer type and settings.


Download colorFabb PA-CF Safety Data Sheet PDF


Other Customers Purchased
colorFabb bronzeFill 2.85mm

colorFabb bronzeFill 2.85mm

£37.50 excl. VAT
colorFabb XT-CF20 2.85mm

colorFabb XT-CF20 2.85mm

£37.50 excl. VAT