Innofil3D PLA Grey 2.85mm

Roll over image for larger view

Spacer imageSpacer image

Innofil3D PLA Grey 2.85mm

Product code: INNOF-PLA285-GREY

Part Number:  PLA-0023b075



£27.00 incl. VAT.


In stock
:  Grey



PLA Grey 2.85mm filament produced by Innofil3D, is a high quality biodegradable 3D printing material. PLA is a great all-round 3D printing filament, particularly suitable for larger parts as it has a lower tendency to warp.


InnofIl3D PLA is available in a wide range of colours in 2.85mm diameter.


Each Innofil3D PLA spool contains approx. 750g of filament.


Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

Innofil3D PLA Technical Specifications



Innofil3D PLA

(Polylactic Acid)




Recommended print temperature

200°C ± 10°C

Recommended bed temperature

Heated bed not required

Recommended print speed

40 - 80mm/sec

Spool hub hole


Spool diameter



1240 kg/m3


Compatible with wide range of FDM / FFF 3D printers which accept 2.85mm or 1.75mm PLA filament

Storage conditions

For best results, store in air-tight container

Approved food contact safe

Natural grade is FDA approved

Coloured grades are not tested


NB: Properties and settings may vary depending on printer type and setting.


Download InnofIl3D PLA technical data sheet PDF

Download Innofil3D PLA safety data sheet PDF

Does Innofil3D PLA work with all 3D printers?

Innofil3D PLA filament comes on an open spool (see Tech Specs for spool dimensions). It is suitable for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.


What are the processing guidelines for Innofil3D PLA?

  • Recommended extruder temperature: 200°C ± 10°C

  • Recommended platform temperature: heated bed not required

  • Recommended print speed: 40 - 80mm/s 


What is the diameter tolerance?

The diameter tolerance on Innfil3D PLA filament is 2.85mm ± 0.10mm and 1.75 ± 0.05 mm.


Is a heated bed necessary for printing with Innofil3D PLA?

No, a heated bed is not necessary for printing in Innofil3D PLA filaments. PLA performs well on both heated and non-heated build platforms


Can Innofil3D PLA be used as support material?

Yes, PLA works well in prints as support material and can be removed once the print is complete.



Other Colours Available
Innofil3D PLA Black 2.85mm

Innofil3D PLA Black 2.85mm

£22.50 excl. VAT
Innofil3D PLA Green 2.85mm

Innofil3D PLA Green 2.85mm

£22.50 excl. VAT
Innofil3D PLA Natural Translucent 2.85mm

Innofil3D PLA Natural Translucent 2.85mm

Natural Translucent
£22.50 excl. VAT
Innofil3D PLA Orange 2.85mm

Innofil3D PLA Orange 2.85mm

£22.50 excl. VAT
Innofil3D PLA Red 2.85mm

Innofil3D PLA Red 2.85mm

£22.50 excl. VAT
Innofil3D PLA White 2.85mm

Innofil3D PLA White 2.85mm

£22.50 excl. VAT
Innofil3D PLA Yellow 2.85mm

Innofil3D PLA Yellow 2.85mm

£22.50 excl. VAT