colorFabb glowFill 2.85mm

Roll over image for larger view

 colorFabb glowFill 2.85mmcolorFabb glowFill 2.85mm 
Spacer imageSpacer image

colorFabb glowFill 2.85mm

Product code: CF-285-GLW



£36.00 incl. VAT.


In stock



glowFill 2.85mm filament by colorFabb is a high quality speciality 3D printing material that glows in the dark. In daylight, glowFill is a soft creamy colour, which when put under light glows a green-ish light.


Each colorFabb glowFill spool contains approx. 750g of filament, is available in 2.85mm diameter.


Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

colorFabb glowFill Technical Specifications



colorFabb glowFill

PLA / PHA with concentrated phosphorescent pigment




Recommended print temperature

195°C - 220°C

Recommended bed temperature 50°C - 60°C (if available. Heated bed not required)
Recommended print speed 40 - 100 mm/s
Spool hub hole


Spool diameter 200mm
Glass transition temperature 55°C
Density 1.210 - 1.430g cm3

Compatible with wide range of FFF / FDM based 3D printers which

accept 1.75mm or 2.85mm filament 

Storage conditions

For best results, store in air-tight container

Approved food contact safe No


NB Properties and settings may vary depending on printer type and settings.


Download colorFabb glowFill Safety Data Sheet PDF

Does colorFabb glowFill work with all 3D printers?

The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.


The following printers are used in the colorFabb lab: Ultimaker Original, Ultimaker Original Dual Extrusion, Ultimaker 2, Makerbot Replicator 2, Delta Tower (E3D hot-end), Felix 20, Leapfrog Creator, BEETHEFIRST. As such, colorFabb bambooFill can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.


What are the processing guidelines for colorFabb glowFill filament?

  • Recommended extruder temperature: 190-210C°C

  • Recommended platform temperature: 50-60°C (if available, heated bed not required)

  • Recommended print speed: 40 - 100 mm/s


Is a heated bed necessary for printing with colorFabb glowFill?

No, a heated bed is not necessary for printing in glowFill. Should you wish to use a heated bed, the recommended platform temperature is 50-60°C. 


Any further tips for printing in colorFabb glowFill?

For a better and longer lasting glow time, print your models with 100% infill and charge up your models under some lights, or just let them enjoy the sunlight for a bit.


What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0.05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.



Other Customers Purchased
colorFabb bronzeFill 2.85mm

colorFabb bronzeFill 2.85mm

£37.50 excl. VAT
colorFabb PLA/PHA Shining Silver 2.85mm

colorFabb PLA/PHA Shining Silver 2.85mm

£27.00 excl. VAT
colorFabb XT-CF20 2.85mm

colorFabb XT-CF20 2.85mm

£37.50 excl. VAT