colorFabb brassFill 1.75mm

Roll over image for larger view

Spacer imageSpacer image

colorFabb brassFill 1.75mm

Product code: CLRFBF-175-BRASS

 

£45.00

£54.00 incl. VAT.

 

In stock
 

QTY

 

brassFill 1.75mm filament by colorFabb is a PLA based filament blended containing brass particles, which once printed can be polished to achieve a golden shine.

 

brassFill is an experimental 3D printing filament and the product is still in beta with colorFabb whilst they continue to review and adjust its formulation and printing guidelines.

 

brassFill is slightly softer then bronzeFill and copperFill, so care should be taken when applying pressure onto the filament. Users need to take extra care to not over-stress the filament, with pressure and retraction settings.

 

Each colorFabb brassFill spool contains approx. 750g of filament.

 

Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.


colorFabb brassFill Technical Specifications

 

Name

colorFabb brassFill

(PLA/PHA + fine brass powder)

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

190°C - 210°C

Recommended bed temperature 50°C - 60°C (if available. Heated bed not required)
Recommended print speed 40 - 100 mm/s
Spool hub hole

55mm      

Spool diameter 200mm
Compatibility 

Compatible with range of FFF / FDM based 3D printers which accept 2.85mm filament.

 

BrassFill is an experimental 3D printing filament and the product is still in beta with ColorFabb whilst they continue to review and adjust its formulation and printing guidelines.

 

Please note, FDM 3D printers using a Bowden tube set-up and 2.85mm filament may require additional time and adjustments to print with this filament, as results are less reliable than direct-drive 3D printers using 1.75mm.

Storage conditions

For best results, store in air-tight container

Approved food contact safe

No

 

NB Properties and settings may vary depending on printer type and settings.

 

Download colorFabb brassFill safety data sheet PDF

Does colorFabb brassFill work with all 3D printers?

The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

 

The material is still in beta, which means colorFabb are still working on the formulation to get the best possible performance. colorFabb's current formulation is providing excellent results on 1.75mm direct drive printers, such as the Makerbot Replicator 2 and Prusa I3.

 

brassFill is likely to require some adjustment to your 3D printer settings to achieve the best results. brassFill is an experimental 3D printing filament and the product is still in beta with colorFabb whilst they continue to review and adjust its formulation and printing guidelines.

 

brassFill is slightly softer then bronzeFill and copperFill, so care should be taken when applying pressure onto the filament. Users need to take extra care to not over-stress the filament, with pressure and retraction settings.

 

What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0.05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.

 

 

Other Colours Available
colorFabb bronzeFill 1.75mm

colorFabb bronzeFill 1.75mm

£37.50 excl. VAT
CLRFBF-175-BRONZE
colorFabb copperFill 1.75mm

colorFabb copperFill 1.75mm

£37.50 excl. VAT
CLRFBF-175-COPPER
colorFabb woodFill Fine 1.75mm

colorFabb woodFill Fine 1.75mm

£30.00 excl. VAT
CLRFBF-175-WOODFINE
colorFabb XT-CF20 1.75mm

colorFabb XT-CF20 1.75mm

£37.50 excl. VAT
CLRFBF-175-XTCF20
colorFabb_XT Red 1.75mm

colorFabb_XT Red 1.75mm

Red
£29.50 excl. VAT
CLRFBF-XT175-RED