Formlabs TPU 90A Powder 6kg

Our Price: £679.00

(£814.80 Inc. VAT)

Availability

Pre-order

Product code: FL-PD-FS-TP9G-01

–+

Notify me when this item is available

Formlabs TPU 90A Powder is for use with the Formlabs Fuse 1+ 30W SLS 3D printer.

A tough SLS elastomer for resilient and skin-safe products. Formlabs TPU is a flexible material ideal for skin-safe prototypes and end-use parts. The material balances high elongation at break with superior tear strength, resulting in low-cost parts that can withstand the demands of every day use.

Utilise TPU 90A Powder for:

Wearables and soft touch elements
Gaskets, seals, masks, belts, plugs and tubes
Padding, dampers, cushions and grippers
Protective sports equipment
Soles, splints, orthotics and prosthetics

Printer compatibility: Formlabs Fuse 1+ 30W.

Layer height: 110 microns

Post-processing compatibility: Fuse Sift

TPU 90A Powder 6 kg. Colour Grey.

TECH SPECS

FORMLABS NYLON POWDER Technical Specifications

	Nylon 11	Nylon 11 CF	Nylon 12	Nylon 12 GF	TPU 90A
Ultimate Tensile Strength	49 MPa	69 / 52 / 38 MPa (X/Y/Z)	50 MPa	38 MPa	8.7 MPa
Tensile Modulus	1.6 GPa	53 / 2.8 / 1.6 GPa (X/Y/Z)	1.9 MPa	2.8 GPa
Elongation at Break (X/Y)	40%	9 / 15 / 5 % (X/Y/Z)	11%	4%	310%
Heat Deflection Temperature @ 0.45 MPa	182ºC	188ºC	171ºC	170ºC
Refresh Rate	50%	30% in N2 50% in air	30%	30-50%	20%
Flexural Modulus		4.2 GPa
Flexural strength		110 MPa
Tear resistance (X/Y)					66 kN/m
Compatible with Fuse 1	✔		✔	✔
Compatible with Fuse 1+ 30W	✔	✔	✔	✔	✔

NB: Properties and settings may vary depending on printer type and setting. Material properties may vary based on part design and manufacturing practices. It is the manufacturer’s responsibility to validate the suitability of the printed parts for the intended use.

Download Formlabs TPU 90A Powder technical data sheet PDF

Other Customers Bought