Formlabs Fuse Sift

Formlabs Fuse Sift
Formlabs Fuse SiftFormlabs Fuse SiftFormlabs Fuse Sift

Price STARTING FROM

Our Price:  £6,299.00

(£7,558.80 Inc. VAT)

Availability:  

Pre-order
Product code:  FL-PKG-FST-230V
+

Formlabs


The Formlabs Fuse Sift is a safe, efficient powder recovery system for the Fuse 1 SLS 3D printer.

This all-in-one station combines part extraction, powder recovery, storage, and mixing in a single free-standing device. Fuse Sift enables the production of functional parts at a 30% powder refresh rate, with unlimited cycles. This means you can print with up to 70% recycled powder.

Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply.

Key features of the Fuse Sift include:

  • Compact, enclosed system. A negative air pressure system keeps powder inside while enabling open access and easy clean up
  • Low waste. 30% material refresh rate means you can print with up to 70% recycled powder. Fuse Sift’s sieve filters out particles to be remixed with new powder and reused in future prints
  • Automatic powder mixing. Fuse Sift will dispense and mix used and new powder automatically so you can reduce waste and control your powder supply
  • Nonstop printing. Reduce downtime by transferring modular build chambers and powder cartridges between the Fuse 1 and Fuse Sift for a nonstop, cyclical workflow.

The Fuse Sift is compatible with the Fuse 1 SLS 3D printer for a streamlined process. Complete set up of Fuse 1 system starts from £22,183.00 - view packages

12 month manufacturer warranty included.


The Formlabs Fuse Sift comes with:

  • 1 year manufacturer warranty
  • Complete toolkit, including: large brush, 2x small brushes, pipe cleaner, dental picks, vacuum brush tool, vacuum crevice tool, gloves, dust mask, safety glasses, lifting straps

Complete set up of Fuse 1 system starts from £22,183.00. Request quote to see available packages.

Formlabs Fuse SIFT Technical Specifications

Printer Compatibility
Fuse 1
Fuse Sift Dimensions
99.1 x 61.0 x 188.8 cm

Height when open: 190 cm (75 in)
 Build Chamber Dimensions  27.9 x 34.2 x 48.9 cm 
 Minimum Access     Dimensions  221.1 x 122.0 x 218.0 cm
Weight
 93 kg (without build chamber or powder)
 Build Chamber Weight  11kg (17.6kg, full with 20% packed powder)
Air Filtration Technology
Replaceable HEPA filter
Build Volume
 16.5 (w) x 16.5 (d) x 30.0 cm (h) (with radiused corners)
Fresh Powder Hopper Capacity
10.7 kg Nylon 12
Used Powder Hopper Capacity
 9.8 kg Nylon 12
Operating Environment
18 – 26 ºC
≤ 30% ambient humidity
 Air Handling  Negatively pressurised hood with replaceable HEPA filter
 Independent venting system
Power Requirements
 With a vacuum that draws less than 6 A (230 VAC) / 12 A (120 VAC):
 EU: 230 VAC, 7.5 A (dedicated circuit)

 With a vacuum that draws more than 6 A (230 VAC) / 12 A (120 VAC):
 EU: 230 VAC, 10 A (dedicated circuit)
Vacuum Requirements
Auxiliary vacuum with static dissipative components that is grounded and bonded (e.g. a NFPA 652 compliant vacuum)
Connectivity
Wi-Fi (2.4 GHz)
Ethernet (1000 Mbit)
USB 2.0
 Ethernet Connectivity
 RJ-45 Ethernet (10BASE-T/100BASE-TX/1000BASE-T) LAN port
 Connect with a shielded Ethernet cable (not included): minimum Cat5, or Cat5e or Cat6 for 1000BASE-T
 WiFi Connectivity
 Protocol: IEEE 802.11 b/g/n
 Frequency: 2.4 GHz
 Supported security: WPA/WPA2
 USB Connectivity   USB (rev 2.0) B port with a USB A-B cable
Sound Emission
Does not exceed 76.5 dB(A)
Fuse Sift Control
Interactive touchscreen, physical buttons

Please note the Technical Specifications are provided by the Manufacturer and may be subject to change.

Other Customers Bought
Formlabs Fuse 1

£13,999.00

Production-ready Nylon SLS 3D printer

Formlabs Nylon 12 Powder 6 kg

£499.00