colorFabb_XT Yellow 1.75mm

Roll over image for larger view

 colorFabb_XT Yellow 1.75mmcolorFabb_XT Yellow 1.75mm 
Spacer imageSpacer image

colorFabb_XT Yellow 1.75mm

Product code: CLRFBF-XT175-YELLOW



£35.40 incl. VAT.


In stock
:  Yellow



colorFabb_XT Yellow 1.75mm filament is made with Eastman Amphora™ 3D polymer. It is low-odour, styrene-free and BPA (Bisphenol A) free. It is high strength and very high toughness, has a high TG/improved temperature resistance and FDA food contact compliant, great for printing functional and engineering parts.


Each colorFabb_XT spool contains approx. 750g of filament, is available in 1.75mm and 2.85mm diameters in a range of colours.


Due to the large variation of monitors, video cards, operating systems & Internet browsers and the effects each has on each other, the colours on this page may not exactly match the materials.

colorFabb XT Technical Specifications




Eastman Amphora (TM) 3D Polymer AM1800




Tensile properties

Tensile Stress @ Yield D  50 MPa (7300 psi)

Tensile Stress @ Break D  28 MPa (4100 psi)

Tensile Modulus 1900 MPa (2.7 x 105 psi )

Recommended print temperature

240°C - 260°C

Recommended bed temperature

60°C - 70°C

Recommended print speed

35 - 50mm/sec

Spool hub hole


Spool diameter


Glass transition temperature



Compatible with wide range of FDM / FFF 3D printers which accept 2.85mm or 1.75mm filament

Storage conditions

For best results, store in air-tight container

Density 1.370 g/cm3
Approved food contact safe Yes: FDA food contact compliant


NB: Properties and settings may vary depending on printer type and setting.


Download colorFabb_XT technical data sheet PDF

Download colorFabb_XT safety data sheet PDF


Does colorFabb XT work with all 3D printers?

The colorFabb testlab features a wide range of popular 3d printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.


The following printers are used in the colorFabb lab: Ultimaker Original, Ultimaker Original Dual Extrusion, Ultimaker 2, Makerbot Replicator 2, Delta Tower (E3D hot-end), Felix 20, Leapfrog Creator, Beethefirst.


As such, colorFabb_XT can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.


What are the processing guidelines for colorFabb_XT?

  • Recommended extruder temperature: 240-260°C

  • Recommended platform temperature: 60-70°C

  • Recommended print speed: 35 - 50mm/s 


What is the diameter tolerance?

colorFabb use laser measurement systems to check the diameter of their filament real time during production. It’s measured over 1000 times per second and helps guarantee that each spool of colorFabb 3D printing filament is produced within tolerance. colorFabb can guarantee 0.05mm +/- on both 2.85mm and 1.75mm colorFabb 3D printing filament.


Is a heated bed necessary for printing with colorFabb_XT?

XT works best with a heated bed, with temperatures around 60-70°C. For printing on a non-heated bed, follow colorFabb’s hints and tips for 3D printing in colorFabb_XT.


Is it necessary to coat the build platform prior to a print?

We would recommend using your normal adhesion, as you would for any other print, for example a little glue stick on an Ultimaker 2.


Can colorFabb_XT be used as support material?

Yes, colorFabb works well in prints as support material and can be removed once the print is complete.


Are there any additional printing tips for colorFabb_XT?

Yes, colorFabb have created an excellent guide for 3D printing in XT.


Is colorFabb_XT food or medical grade?

colorFabb_XT is FDA food contact compliant.



Other Colours Available
colorFabb_XT Black 1.75mm

colorFabb_XT Black 1.75mm

£29.50 excl. VAT
colorFabb_XT Clear 1.75mm

colorFabb_XT Clear 1.75mm

£27.50 excl. VAT
colorFabb_XT Dark Green 1.75mm

colorFabb_XT Dark Green 1.75mm

Dark Green
£29.50 excl. VAT
colorFabb_XT Dark Grey 1.75mm

colorFabb_XT Dark Grey 1.75mm

Dark Grey
£29.50 excl. VAT
colorFabb_XT Light Blue 1.75mm

colorFabb_XT Light Blue 1.75mm

Light Blue
£29.50 excl. VAT
colorFabb_XT Light Green 1.75mm

colorFabb_XT Light Green 1.75mm

Light Green
£29.50 excl. VAT
colorFabb_XT Light Grey 1.75mm

colorFabb_XT Light Grey 1.75mm

Light Grey
£29.50 excl. VAT
colorFabb_XT Orange 1.75mm

colorFabb_XT Orange 1.75mm

£29.50 excl. VAT
colorFabb_XT Pink 1.75mm

colorFabb_XT Pink 1.75mm

£29.50 excl. VAT
colorFabb_XT Purple 1.75mm

colorFabb_XT Purple 1.75mm

£29.50 excl. VAT
colorFabb_XT Red 1.75mm

colorFabb_XT Red 1.75mm

£29.50 excl. VAT
colorFabb_XT White 1.75mm

colorFabb_XT White 1.75mm

£29.50 excl. VAT