colorFabb PA-CF Low Warp 1.75mm

colorFabb PA-CF Low Warp 1.75mm
 colorFabb PA-CF Low Warp 1.75mmcolorFabb PA-CF Low Warp 1.75mm 

Our Price:  £60.00

(£72.00 Inc. VAT)


In stock
Product code:  CF-175-PA-CF


colorFabb PA-CF Low Warp 1.75mm 3D printing material has been developed between colorFabb and LEHVOSS Group. PA-CF Low Warp is a carbon-fibre infused polyamide material for use with FFF (extrusion) 3D printers.

PA-CF Low Warp demonstrates good tensile and impact strength over standard FFF filaments, and allows continued use at 120°C while retaining sufficient properties for the intended application.

PA-CF Low Warp 1.75mm is abrasive. colorFabb recommend using wear resistant nozzles such as hardened steel.

Each colorFabb PA-CF spool contains approx. 700g of filament.

colorFabb PA-CF Low Warp Technical Specifications


colorFabb PA-CF Low Warp




Recommended print temperature

260°C - 280°C

Recommended bed temperature Cold or 40°C - 50°C (for higher infill prints)
Spool hub hole


Spool diameter 200mm
Density 1.4 g/cm3
Comments / considerations

Carbon Fibre is abrasive and will accelerate the nozzle wear of brass nozzles much faster than unfilled filaments. colorFabb recommend using wear resistant nozzles, such as E3D hardened steel nozzles

For more printing tips with colorFabb PA-CF visit

Storage conditions

Store in air-tight container, material is moisture sensitive

NB Properties and settings may vary depending on printer type and settings.

Download colorFabb PA-CF Safety Data Sheet PDF