Does colorFabb corkFill work with all 3D printers?
The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials. colorFabb corkFill can be used for most commercially available leading brands 3D FDM/FFF printers. Please check your specific printer set up, specification and operation of your 3D printer for compatibility.
corkFill is likely to require some adjustment to your 3D printer settings to achieve the best results. For example, it is recommended to increase the flow rate with approximately 4-10%. This will allow the filament to keep passing through the hot zone at a steady pace.
What are the processing guidelines for colorFabb corkFill filament?
- Recommended extruder temperature: 210 - 230°C
- Recommended platform temperature: 50 - 60°C (if available, heated bed not required)
- Recommended print speed: 40 - 60 mm/s
Is a heated bed necessary for printing with colorFabb corkFill?
No, a heated bed is not necessary for printing in corkFill. Should you wish to use a heated bed, the recommended platform temperature is 50-60°C.