colorFabb copperFill 1.75mm

colorFabb copperFill 1.75mm

Our Price:  £37.50

(£45.00 Inc. VAT)

Availability:  

In stock
Product code:  CF-175-CPR
+

ColorFabb


copperFill 1.75mm filament by colorFabb is an experimental* speciality 3D printing material.  Based on colorFabb’s excellent PLA filament, copperFill has the addition of micronised copper powder blended within the material. 3D printing in copperFill creates a wonderful finish to your parts, which can then be sanded and polished to shimmer and shine.

*Experimental material: testing showed reliable results using the "all metal" hot-ends. Hot-ends with a teflon isolator coupler can generate adhesion to the copper filament potentially leading to clogs.

Each colorFabb copperFill spool contains approx. 750g of filament, is available in 1.75mm and 2.85mm diameters.


copperfill info

Does colorFabb copperFill work with all 3D printers?

The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

Hot-ends with a teflon isolator coupler can generate adhesion to the copper filament potentially leading to clogs.

What are the processing guidelines for colorFabb copperFill filament?

  • Recommended extruder temperature: 190 - 210C°C
  • Recommended platform temperature: 50 - 60°C (if available, heated bed not required)
  • Recommended print speed: 40 - 100 mm/s

Are there any tips for printing in colorFabb copperFill?

Yes. Have a read of colorFabb’s blog on printing in copperFill.

Is a heated bed necessary for printing with colorFabb copperFill?

No, a heated bed is not necessary for printing in bronzeFill. Should you wish to use a heated bed, the recommended platform temperature is 50 - 60°C.

colorFabb copperFill Technical Specifications

Name

colorFabb copperFill

(PLA/PHA + fine copper particles)

Diameter(s)

1.75mm

2.85mm

Recommended print temperature

190°C - 210°C

Recommended bed temperature 50°C - 60°C (if available. Heated bed not required)
Recommended print speed 40 - 100 mm/s
Spool hub hole

55mm      

Spool diameter 200mm
Glass transition temperature 55°C
Density 3.9 g/cm3
Compatibility 
  • Experimental material.
  • Testing showed reliable results using the "all metal" hot-ends.
  • Hot-ends with a teflon isolator coupler can generate adhesion to the copper filament potentially leading to clogs. 
Storage conditions

For best results, store in air-tight container

Approved food contact safe No

NB Properties and settings may vary depending on printer type and settings.

Download colorFabb copperFill Safety Data Sheet PDF

Other Customers Bought
colorFabb bronzeFill 1.75mm

£37.50