colorFabb brassFill 1.75mm 1500g

Our Price: £68.00

(£81.60 Inc. VAT)

Availability:

In stock

Product code: CF-175-BRS-1500

–+

ColorFabb

brassFill 1.75mm 1500g filament by colorFabb is a PLA based filament blended containing brass particles, which once printed can be polished to achieve a golden shine.

brassFill is an experimental 3D printing filament.

brassFill is slightly softer then bronzeFill and copperFill, so care should be taken when applying pressure onto the filament. Users need to take extra care to not over-stress the filament, with pressure and retraction settings.

Each colorFabb brassFill spool contains approx. 1500g of filament.

FEATURES
TECH SPECS

brassfill info

Does colorFabb brassFill work with all 3D printers?

The colorFabb testlab features a wide range of popular 3D printers. colorFabb continuously test their products on a range of 3D printers to check the quality of the materials produced and to develop exciting new materials.

brassFill is likely to require some adjustment to your 3D printer settings to achieve the best results. brassFill is an experimental 3D printing filament.

colorFabb brassFill Technical Specifications

Name	colorFabb brassFill (PLA/PHA + fine brass powder)
Diameter(s)	1.75mm 2.85mm
Recommended print temperature	190°C - 210°C
Recommended bed temperature	50°C - 60°C (if available. Heated bed not required)
Recommended print speed	40 - 100 mm/s
Spool hub hole	55mm
Spool diameter	200mm
Compatibility	Compatible with range of FFF / FDM based 3D printers which accept 2.85mm filament. BrassFill is an experimental 3D printing filament Please note, FDM 3D printers using a Bowden tube set-up and 2.85mm filament may require additional time and adjustments to print with this filament, as results are less reliable than direct-drive 3D printers using 1.75mm.
Storage conditions	For best results, store in air-tight container
Approved food contact safe	No